Universal Single Phase kWh Meter, 2 or 3-Wire, 120V up to 120/240V, 100A, 60Hz


$120.00

Compact and really straightforward to set up. Simple DIN-Rail (*2*). Wires cross via 13.7mm (0.5 inch) diameter tubes within the meter physique — Will settle for 22 AWG – 1 AWG wire. There are two screws that pierce the insulation of the wires that cross via the meter. The meter comes with two units of bushings for medium and small wire diameter wires, which hold the wires centered so the piercing screws don’t have any hassle partaking the conductor. The upside-down teardrop form of the tubes additionally serves to hold the wires centered.

Single Phase 120/240V 3-Wire (2 hots, 1 impartial): In this configuration each sizzling wires cross via the physique of the meter. The piercing screws are used to pierce the wire insulation to present the meter with a voltage reference for every line. There can be a port on the meter for a impartial reference. The meter will operate with out this connection (at ~1% accuracy) however it will likely be 0.5% correct with the impartial connection.

Single Phase 120V or 208-240V 2-Wire (2 hots): As described above, the meter is designed to meter single part electrical methods that do not have a impartial obtainable. Both sizzling wires cross although the physique of the meter and the piercing screws are used to pierce the wire insulation to present voltage references to the meter.

Single Phase 120V or 208-240V 2-Wire (1 sizzling, 1 impartial): In this case Line 1 passes although the tube marked L1. The piercing screw is used to pierce the wire insulation for L1 to present the voltage reference to the meter. The Neutral reference can both cross via the Tube marked L2 or it may be related to the port marked N. If the impartial passes although the L2 tube then the piercing screw is used to pierce the wire insulation for to present the impartial reference to the meter.

Fully solid-state kWh meter with 800 pulse per kWh pulse output.

0.5–1% accuracy depending on setup (see above), LCD readout in hundredths of a kWh, to 99999.99 kWh. No conversion issue or multiplier.
Single Phase 120/240V 3-Wire (2 hots, 1 impartial)
Single Phase 120V or 208-240V 2-Wire (1 sizzling, 1 impartial)
Single Phase 120V or 208-240V 2-Wire (2 hots)
Up to 100A and 13.5mm Wire Diameter (22 AWG – 1 AWG wire)
Read domestically on the LCD show or remotely by way of pulse output

Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Universal Single Phase kWh Meter, 2 or 3-Wire, 120V up to 120/240V, 100A, 60Hz”

There are no reviews yet.